thoughtasylumTOOLBOX Preview Guides Use offline Automate Feedback

Guides › Developer

Who's on my network? Identifying devices by their MAC address

Your router lists a device called android-3f2a… or nothing at all, and you’d like to know what it is before deciding whether it should be there. Every network card has a MAC address, and its first half says which company made the card. These tools look that up in your browser and help you make sense of the addresses around it.

1. List the devices

The fullest list is your router’s: its admin page (often at 192.168.1.1 or 192.168.0.1, or in its app) has a page called something like Connected devices or DHCP clients, with each device’s IP and MAC address.

Your own computer can list the devices it has talked to recently, though it may miss ones that are asleep:

  • Mac or Windows: run arp -a in Terminal or Command Prompt.
  • Linux: run ip neigh.

Copy the whole output; there’s no need to pick out the addresses.

2. Look up who made each one

Paste the list into the MAC Address Lookup. It finds the addresses wherever they sit in each line, including the shortened ones macOS’s arp writes (0:1b:63:a:b:c), and shows each one’s maker and kind.

The maker is the company that bought that block of addresses from the IEEE. That’s often the device’s brand, but it can be the maker of a part inside it: a smart plug may show as the company that made its Wi-Fi chip, such as Espressif, rather than the brand on the box. Sort out the ones you recognise first, then look at what’s left.

3. Private addresses aren’t a warning sign

Many devices show Unicast, locally administered and no maker. That means the address was made up by the device rather than built in, and it’s usually a phone, tablet or laptop using a private Wi-Fi address, which current iPhones, Android phones and Windows do by default so that networks can’t track them. Virtual machines and containers use made-up addresses too.

To match one to a device, look in that device’s Wi-Fi settings for the network: iPhones show it under Private Wi-Fi Address, Android under the network’s details. The address can change from time to time, so a phone you know may appear as a new device after a while.

4. Check the addresses in your network

In the Subnet Calculator, type your computer’s IP address with its prefix or subnet mask, as shown in its network settings (such as 192.168.1.23/24 or 192.168.1.23 255.255.255.0). It gives the range of usable addresses, so you can tell a device on your network from one that isn’t.

To give a printer or server a fixed address, pick one in that range that the router won’t hand out to other devices: its DHCP settings say which part of the range it uses. Group addresses by network takes the IP addresses from step 1 and sorts them into networks, which shows at a glance if something is on a guest network or a different one.

Good to know

A maker’s name doesn’t prove what a device is, and a device can be set to use any MAC address it likes. If something still can’t be explained, the router’s own settings are the place to act: change the Wi-Fi password, or block the device by its MAC address, and see what stops working.

All 66 guides, grouped by what they help with.

Saved you a few minutes? Say thanks with a coffee.

Something wrong or unclear in this guide? Report it or suggest a guide.

↑ ↓ move↵ openesc close