Guides › Images
Converting screen colours to CMYK for print
A logo that’s a bright blue on the website can come back from the printer a duller, darker blue on the leaflets. Screens make colour from light, presses from four inks (cyan, magenta, yellow and black, CMYK) on paper, and some screen colours are out of the inks’ reach. These tools show you which colours those are before anything is printed, and work it out the way design apps do.
1. Find the colours you use
If you have the colours as hex codes, such as #ff6a13, skip to the next step. If you only have the logo, open it
in Image Palette: it lists the main colours, most used first, under Hex codes. A logo in navy,
orange and green gives #1f3a5f, #ff6a13 and #00a86b, with white for the background and lighter tints where
the edges blend into it. Choose a colour to open it in the Colour Converter.
2. Ask the printer which paper and press it’s for
CMYK values depend on the paper and press, so ask your printer which printing condition or profile to use. Most use one of the standard ones. FOGRA39, coated paper (Europe) is the usual one for glossy or silk leaflets and brochures, and FOGRA47, uncoated paper (Europe) for letterheads, notebooks and other matt paper. In the US, coated work is usually GRACoL 2013, coated sheet-fed (US), or SWOP 2013, coated web (US) for magazines.
3. Convert each colour
Type each colour into Any CSS colour in the Colour Converter and choose the Printing condition
under Print (CMYK). The orange #ff6a13 on FOGRA39 is C=0 M=70 Y=100 K=0, with a Difference (ΔE 2000)
of 3.3: a noticeable difference, a slightly deeper orange. On FOGRA47, uncoated paper, the difference grows to
8.3, outside what that paper can reach. A vivid blue such as #0066ff is out of reach even on coated paper (6.6),
and prints as a softer #3667af. About 1 is the smallest difference most people can see.
When a colour can’t be matched, either accept the duller version, or agree a print version of it with whoever
owns the brand. The InDesign swatch name row is the value to type into a design app. If the printer gives you
CMYK values, type them in the same box, for example C=100 M=0 Y=0 K=0, to see the colour they print as. Total
ink warns you when a mix uses more ink than the condition allows, which can smudge.
The tool has no Pantone conversion (its About this tool says why). For a Pantone colour, ask for the CMYK values Pantone gives, and check them here.
4. Check the PDF before it goes
A PDF printed from a browser, from Markdown to PDF for example, keeps its colours as screen colours, and the printer converts them for their press. The result should be close to what the Colour Converter showed if they convert to the same printing condition with the same Rendering intent, so ask which they use. A PDF made in a design app with the swatches from step 3 is already in CMYK.
Open the PDF in PDF Info & Clean: every font should say Yes, the characters used under Embedded, or the printer may substitute one. Then pull out its pictures in PDF Images, which shows each one’s size in pixels. For sharp printing, a picture needs about 300 pixels for every inch (25.4 mm) it covers on the page: a photo printed 90 mm wide needs about 1,060 pixels across.
All 66 guides, grouped by what they help with.
Saved you a few minutes? Say thanks with a coffee.
Something wrong or unclear in this guide? Report it or suggest a guide.