thoughtasylumTOOLBOX Preview Guides Use offline Automate Feedback

Guides › Images

Fixing up a picture

A logo on a white box, a speck on a photo, a crooked photo of a whiteboard, a banner that is too wide: each is a small job. Image Editor and Vector Editor do them in your browser and nothing is uploaded. They are not AI tools, so check each result, and use Undo (Ctrl+Z) when one isn’t right.

1. Take out a background

In Image Editor, open the picture and choose Transparency › Remove a plain background. It works from the colour round the edge of the picture. If that isn’t enough, choose the Remove a colour tool (R) and click the colour, then pick How:

  • Cut out similar colours makes pixels near that colour transparent. Use it for flat artwork, and raise Tolerance if a fringe is left.
  • Take the colour out works out how much of the colour each pixel contains and removes only that, so soft edges, shadows and glass stay see-through. Use it for a logo with smooth edges that must sit on a dark page.

Both work on colour, not on what the picture shows, so they need a plain background. A cluttered photo, or a subject that is the same colour as its background, will lose parts of the subject. Save as PNG: JPEG has no transparency, so transparent parts come out white.

2. Heal spots and remove small objects

  • Spot healing (J): paint over a spot, scratch or small object and it is filled from the area round it.
  • Clone stamp (C): Alt-click a good area, then paint where the copy should go. Use it when healing guesses wrongly, such as on a pattern.
  • To remove something bigger, select it and use Edit › Fill the selection from its surroundings.

Healing works best on small areas. On a large one it can repeat texture, so work in small strokes and look at the result at full size.

3. Straighten a photo of a page or whiteboard

Choose Image › Straighten a photo of a page. Drag the four corners onto the corners of the page, and you get it flat and upright. Take the photo from straight on and in good light if you can, because the tool can only use the detail the photo has. Text that was blurred when you took the photo will still be blurred.

4. Make a picture narrower without squashing people

Resizing to a narrower width squashes everything. Content-aware resize (in the Image menu) removes the least noticeable lines of pixels instead, so faces and buildings keep their shape. It can only make a picture smaller, a large cut distorts it, and with several layers it joins them into one first. For a small change, crop instead.

5. Enlarge pixel art or a small icon

When you resize, the choice of method matters:

  • Enlarge pixel art at 2×, 3× or 4× keeps hard edges without blur. Use it for pixel art and sprites.
  • Sharp (Lanczos) keeps photos and small icons crisper than Smooth. Use it for ordinary pictures.

Neither adds detail that wasn’t there, so a tiny photo made much larger will still look soft. For a logo you need at any size, trace it, as in the next step.

6. Turn a logo into a vector and tidy it

  1. Open the logo in Image to SVG, set Colours to the number of flat colours it uses, and choose Edit in Vector Editor.
  2. Select a lumpy shape and use Simplify path. Move the slider while the preview shows, and keep Refit smooth curves on to turn the points left back into curves.
  3. If the logo has text and the SVG is for a cutting machine, select the text and use Text to outlines, choosing a Font for outlines and PDF, so the machine needs no font.
  4. Save SVG for the web, or Save PDF for print.

Tracing is an approximation, so compare the result with the original at a large size. If you can, get the original vector file from whoever made the logo.

All 66 guides, grouped by what they help with.

Saved you a few minutes? Say thanks with a coffee.

Something wrong or unclear in this guide? Report it or suggest a guide.

↑ ↓ move↵ openesc close